How to Replace the Seat on Your Incline Festival Chair

Quick answer

To replace the seat on your Incline Festival Chair, remove the old fabric, align the new genuine replacement seat, and secure it over the frame. The whole process takes about 10 minutes.

Steps to replace the seat

1. Remove the old seat: Unclip the four corner straps from the frame poles. Slide the fabric off the frame rails. Note how the straps wrap around the frame for reference. Common mistake: Forcing the fabric off without unclipping all straps can tear the seat. Always unclip first.
2. Position the new replacement seat: Lay the new Incline Festival Chair Replacement Seat over the frame. Match the corner pockets to the frame ends. Ensure the fabric is oriented so the brand label faces outward. Checkpoint: Verify the fabric is not twisted before securing. A twisted seat will sit unevenly.
3. Secure the seat to the frame: Pull each corner pocket over the frame end. Clip the strap around the frame pole and tighten until the fabric is taut. Repeat for all four corners. Common mistake: Overtightening one corner before the others can distort the seat. Tighten each corner gradually in a cross pattern.
4. Test the fit: Sit in the chair and shift your weight. The seat should feel firm and even. If it sags or twists, unclip the straps and adjust the fabric tension. Checkpoint: A properly fitted seat will not sag in the center. If it does, the straps need more tension.

Product facts

• Incline Festival Chair Replacement Seat: Genuine Helinox replacement seat for the Incline Festival Chair, available in Black and Tie Dye. Choosing the official seat guarantees a direct fit and restores the original support without guesswork.